VIP Coatings is the innovation leader in polyurea coatings
Sealing, grouting repairing of almost all vertical and horizontal surfaces
The coatings industry has come a long way from brushes and buckets. Over the past 30 years, chemical engineers have formulated innovative polymer resins that have a range of modulus (from high to low), better fire retardancy, low VOCs and faster reaction times.
Today’s modern coatings, including polyurethane and polyurea, are among the most advanced resins developed. These polyureas, more than any other polymer coating, stand out in their versatility, strength and longevity. They are the next step in the coatings evolution. At the same time, advances in coatings technology have also led to the development of spray, injection and roto-cast application equipment that also improves the performance of polyureas. In particular, plural component equipment technology has been improved to make spray application easier, more uniform in coverage, applicable at lower pressures (as low as 1,000 PSI) and generating less overspray or fogging.
Polyurea materials have two components: the isocyanates quasi-prepolymer and a resin blend. The resin blend is a combination of amine-terminated chain extenders. Unlike polyurethanes, no polyols are used in the manufacture of polyurea resins. When the materials are mixed together in the application equipment, the isocyanates and the amine resins react to form a urea linkage. Polyurea was regarded by many in the coatings industry as an “over-hyped” product with exaggerated features and benefits. True, polyurea systems and technology have many outstanding properties. However, many manufacturers of traditional coating material discounted the claims of polyurea being the “wonder” product; as a result, many manufacturers and end users lost sight of the true advantages of the product. Many old-guard coatings manufacturers did not differentiate between polyurethane and polyurea. All coatings, whether polyether amines (polyurea component) or polyester/polyether hydroxyl (polyurethane urethane component) resins, were identified as polyurethanes. Only in the past seven years have many companies differentiated these coatings.
OEM manufacturers, contractors, engineers and fabricators needed a fast-cure, moistureinsensitive coating system. They required a variety of physical properties, excellent adhesion, smooth surface flow out, superior tensile strength and high brasion resistance. A polyurea system fit that description. The main physical properties of polyurea explain their success.
Fast reaction time
Polyurea’s fast reaction time (5-15 seconds) leaves polyurethane and epoxy materials in the proverbial dust. It is an autocatalytic polymer. With the fast reaction time, polyureas do not easily react with humidity and moisture in substrates, so the material can be readily applied over cold or damp substrates, such as steel, concrete, wood or PU foam.
On the other hand, when smoother flow of material is required to wet out a mold or cover an intricate carved surface, polyureas (like polyurethanes) can be slowed down to have gel times ranging from 20- 60 seconds. Fast reaction time is a great advantage of polyurea. In the case of facility maintenance or rejuvenation, owners want to regain usage of the facility as soon as possible. A fast-reacting polyurea fully cures within a few hours, whereas most polyurethane or epoxy coatings require 24-48 hours before the coated areas can be used to their full potential.
Polyurea is frequently used to protect the exterior of iron pipe, since the pipe can be recoated “above-the-ditch” (in the field) without expensive equipment. The polyurea cures quickly and the pipe can be almost immediately reburied without crack. Many pipelines around the world, including the Trans-Alaska pipeline, have used this technology to speed production and keep maintenance costs to a minimum.
Where moisture or humidity is a concern, polyureas outperform any product on the market today. Polyurethanes can be sensitive to high humidity and moisture in a substrate. As a result, they will react with atmospheric moisture or high humidity to produce carbon dioxide gas and cause foaming and / or pinholing in the surface. In contrast, polyureas are not affected by moisture. The reaction of Component A and Component B (polyamines) or a polyurea system is so fast that the moisture reaction can’t occur. Therefore, the polyurea systems are not sensitive to moisture and humidity, and do not normally produce carbon dioxide bubbles. This is an advantage in climates or regions with high humidity or dewpoints.
On the whole, polyureas are a more versatile protector for concrete. Recent innovations have led to the blending of epoxy and polyurea to form materials that are ideal for below-grade waterproofing, bridges, parking decks and flooring. Since these are slower curing systems, aggregates such as stone, iron or quartz flakes can be added to improve traction for vehicles and non-skid qualities for pedestrians.
If a substrate is moist or has condensation on it, polyurea will perform much better than polyurethanes. Many in the industry were surprised when Texaco produced a video of polyurea being sprayed over ice and water without affecting the reaction of the components. This demonstration is generally not encountered in real-world applications. Applying any coating over an excessively wet or unprimed/unprepared substrate can have detrimental effects on the adhesion. Organizations such as the National Association of Corrosion Engineers and the Steel Structures Painting Council issue guidelines for properly preparing and priming surfaces. A properly prepared surface will improve adhesion, especially for critical applications such as moist concrete for containment lining and flooring, as well as adhesion protection for geotextile, wood and steel. In these applications, polyurea systems will have the best results. The heat sink typically causes application problems for steel substrates. Conventional polyurethane systems applied to heat sink substrates could compromise the properties or adhesion of the first pass. There are no problems using a polyurea system over prepared steel.
Superior tensile strength
In waterproofing applications, a low modulus and a high elongation elastomer are required to meet the challenge. Polyurethanes have traditionally been regarded as having higher elongation and a lower modulus than a polyurea with a similar hardness. However, the days of polyurethanes having lower modulus than polyureas are over. Modern advances in the chemistry mean polyureas are formulated to feel as soft and elastic as polyurethane. This, in turn, opens the door for OEM manufacturers that produce soft “vinyl-like” skins, for example, to choose polyurea. The new polyureas will stretch with much less force. And, more importantly, polyureas will resist punctures and tears equally as vigorously as polyurethanes.
Low to No Volatile Content The composite and OEM fabrication industry has seen a dramatic jump in the use of polyurea as an alternative to unsaturated polyester vinyl esters and polyester fiberglass for open mold part production. Automotive and off-highway body panels, bumpers and other parts are just a few of the parts that can easily be manufactured more quickly and without harmful emissions. Many manufacturers in the marine, bath fixture and recreational vehicle industry can also turn to polyurea as a reliable, cost effective alternative to FRP systems. The low volatile content of polyurea also makes it very attractive for confined workspaces. Many local and state government agencies are cracking down on styrene emissions. Unlike polyester fiberglass or epoxy, no fumes or styrene emission are associated with polyurea. Therefore, polyurea is ideal for applications such as wall and floor coatings for the food and beverage industries.
Until recently, manufacturers have been faced with the choice of shutting down production or, in the case of large companies, paying the fines and continuing with production in hopes there is enough profit margin in each unit produced to keep the company operating. Modern structural polyurea systems can offer these companies an alternative production material to eliminate government fines and increase profits.
High abrasion resistance
In a highly abrasive environment, polyureas perform extremely well. In applications once thought to require high-solids epoxies, polyureas are winning at every turn. In the rail and barge industry, polyureas are used instead because of their superior elongation and high impact resistance. Epoxies will crack and delaminate when exposed to constant pounding. The durability and physical properties of polyurea have made it the system of choice for the rapidly growing truck bed lining industry. Polyurea is sprayed in a uniform texture over the metal bed surface. Plus, thanks to innovations in application equipment, non-professional sprayer and retail applications can quickly turnover multiple trucks in an afternoon. Polyurea has proven its distinct advantages over polyurethane liners.
Heat and fire resistance
When it comes to heat resistance and fire retardance, polyureas have the advantage over comparably formulated polyurethane. Because of its formulation, structural / rigid polyureas have excellent resistance to heat distortion and sagging. At the same time, polyurea maintains its flexibility and high impact resistance. This is not the case for molded structural polyurethane parts that are in constant close proximity to heat. Polyurethanes tend to sag. Polyureas resist heat sag and maintain their shape. And when the heat is really on, like in the case of fire, polyureas will naturally outperform most other polymer resins. The resulting low smoke and flame spread is due to polyureas’ molecular structure. Exposed to constant flame for 20-30 seconds, polyurea will self-extinguish.
Many polyureas are based on aliphatic isocyanate prepolymers that are highly weather resistant and color stable. Products based on aromatic isocyanate prepolymers are not color stable and will tend to chalk or darken in color with extended exposure. For a long time, aromatic polyurea was the primary version of polyurea that was promoted to the industry. In the mid-1990s, aliphatic and aliphatic-modified polyureas were developed. These products revolutionized the coatings business. Now end-users could safely choose a polyurea for applications that would be constantly exposed to sunlight, without fear of discoloration and / or chalking.